Korg NAUTILUS Series, Parameter Manual, Page: 579 / 961

SET LIST: Page Menu Commands Write Set List
569
SET LIST: Page Menu Commands
Compare → p.112
Write Set List → p.569
Exclusive Solo → p.113
Initialize Set List → p.569
Edit Program/Combination/Song → p.569
Update Program/Combination → p.569
PAGE → p.126
MODE → p.126
Write Set List
This command writes the current Set List into the
NAUTILUS internal memory. It’s available on every page in
SET LIST mode.
Write Set List lets you:
• Save your edits
• Rename the Set List
• Make a copy of the Set List to a different location in
memory
1. Select “Write Set List” to open the dialog box.
The upper line of the dialog shows the name of the Set List.
To change the name:
2. Press the text edit button to open the text edit dialog
box, enter the desired name, and then press OK to
confirm.
If a USB QWERTY keyboard (commercially available) is
connected, you can use this to enter text instead of the on-
screen keyboard. For more information, see “Editing names
and entering text” on page 202 of the OG.
To write to a different Set List number (to make a backup
copy, for instance):
3. Press the Set List popup button, select the destination
Set List number, and then press OK to confirm.
4. To Write the Set List, press the OK button. To cancel,
press the Cancel button.
Do not turn off the power for at least 10 seconds after
using the
Write Set List command. This allows the
system time to complete the process, which includes
saving a backup of the data to the internal drive.
Initialize Set List
This brings up a confirmation dialog, with the text:
Initialize Set List: Are You Sure?
An OK button confirms the initialization; a Cancel button
cancels the initialization.
When initialized, all 128 slots are set to the following:
Type : Program
Bank and Number : A 000
Slot Name : Slot [slotNumber]; e.g. Slot 27
Volume :127
Keyboard Track : 1
Hold Time : Global setting
The Comment field is left empty.
Edit Program/Combination/Song
This command allows you to edit the current Program,
Combination, or Song in its native mode.
To do so:
1. Select the desired item in the Set List.
Next, from any of the Set List pages:
2a.In the menu, select the Edit [Type] command.
The actual name of the command will be either Edit
Program , Edit Combination , or Edit Song , depending on
the selected Slot.
or:
2b.Hold the ENTER button, and touch the Slot’s button.
The mode will change to PROGRAM, COMBINATION, or
SEQUENCER as appropriate, and the system will display
the Home page for the selected item.
The PROGRAM, COMBINATION, or SEQUENCER mode
button’s LED will blink, and the SET LIST LED remains
solidly on
, It shows that you are editing an item in a Set List.
The Set List settings, including EQ and volume, continue to
affect the sound.
3. Edit as desired.
4. Write your edits.
5. Press the MODE button to return to the SET LIST.
SET LIST mode will be as you left it, with the same Set List
and Slot selected.
Update Program/Combination
This allows you to save edits made via the front-panel
controls (mixer settings, Tone Adjust, ARP, tempo, etc.)
without exiting SET LIST mode.