Korg NAUTILUS Series, Parameter Manual, Page: 113 / 961

PROGRAM > IFX 8–7: IFX 1–12
103
8–7: IFX 1–12
This page lets you edit the parameters of the insert effect 1.
Use the tabs at left to select IFX1 through IFX12.
To select different effects types, use the Insert FX page. For
more information, see “8–5: Insert FX” on page 101.
Effects Modulation: Dmod
Most effects have one or more parameters which can be
modulated in realtime. In the NAUTILUS, this is called
Dynamic Modulation, or Dmod for short.
For a complete list of Dmod sources, see “Dynamic
Modulation Source List” on page 910.
Effect dynamic modulation (Dmod) is controlled on the
global
MIDI Channel (GLOBAL 1–1a). For more
information, see “Dynamic modulation (Dmod) and
Tempo Synchronization” on page 732.
8–7a: IFX1
This configures the parameters of insert effect 1. Use the
tabs at the left to select IFX1–12.
IFX1 [000...197]
This selects the effect type for insert effect 1.
➝
p.101 “IFX1”
IFX1 On/Off [Off, On]
This turns the insert effect on and off. It is linked with the
on/off setting in the Insert FX page.
P (Effect Preset) [P00, P01…15, U00…15, -------]
This selects the effect preset.
Effect preset function
You can store the parameters for each effect on the
NAUTILUS to internal memory. This function is called
“effect presets”.
Effect parameters you edit are saved as part of each
Program, but effect presets let you save the variations for the
parameter settings per effect. The effect settings you like are
saved as presets, and you can easily recall them from other
Programs or modes.
The following presets can be saved to memory for each
effect.
P00: Initial Set: These are the default settings that are
recalled when you select an effect type. You can’t save your
own settings here.
P01…P15: These usually contain Korg preset data (though
some effects may not include presets). We recommend that
you store your settings in U00–U15.
U00…U15: These are areas in which you can store your
own settings.
Some effects do not contain preset data.
---------------: This shows that no Effect Preset has been
selected. You’ll see this if you’ve just selected an effect,
written a Program, or selected a new Program. Selecting this
setting from the menu will not have any effect.
Note: Programs save the effects parameter settings, but they
don’t save the number of the selected Effect Preset. If you
select an Effect Preset, and then save the Program, the Effect
Preset setting will revert to “
--------------.”
Using Effect Presets
1. Select an effect in the Insert FX page.
2. The P00: Initial Set settings will be recalled.
“P (Effect Preset)” will show --------.
3. Use “P (Effect Preset)” to select an effect preset: P00–
P15 or U00–U15.
The stored parameters will be recalled. Note that this will
overwrite all parameters of the effect.
4. Edit the recalled parameters as desired.
5. You can save the settings for each program using the
“Write Program” page menu command.
8–7PMC
8–7a
8–7b