Korg NAUTILUS Series, Parameter Manual, Page: 366 / 961

EXi: SGX-2 Premium Piano
356
SGX-2: Tone adjust
SGX-2 Tone Adjust Default Settings
Common Tone Adjust parameters
The SGX-2 supports the following Common Tone Adjust
parameters:
Off . This means that the Tone Adjust control has no effect.
Filter Cutoff. (–99…+99, CC#74, Relative)
This scales the Lid Position .
Amp Velocity Intensity . (–99…+99, Relative)
This scales the effect of velocity on volume.
–99 removes the velocity modulation entirely. +99 means
maximum modulation in the same direction, positive or
negative, as the original Program.
Filter/Amp EG Release Time .
(–99…+99, CC#72, Relative)
This scales the Release Time .
Common LFO Speed . (–99…+99, Relative)
This scales the EXi Program’s Common LFO Frequency .
When the LFO is in MIDI/Tempo mode, this adjusts the
Base Note .
Common Step Sequencer Attack Smoothing . (00…99,
Absolute)
This Absolute parameter sets amount of attack smoothing
for the Common Step Sequencer. For more information,
please see “Smoothing” on page 137.
Common Step Sequencer Decay Smoothing . (00…99,
Absolute)
This Absolute parameter sets amount of decay smoothing
Resonance
Level
Velocity
Intensity
Release
Time
Note Release
Level
Mechanical
Noise Level Damper
Noise Level
Velocity
Bias Lid Position
Buttons:
5: Note Release Enable
6: Mechanical Noise Enable
7: Damper Noise Enable
Buttons:
1: Stereo Perspective
2: Resonance Enable
Button:
9: String Resonance
Enable
Slider:
1: String Resonance
Depth