Korg NAUTILUS Series, Parameter Manual, Page: 525 / 961

SEQUENCER > IFX 8–7: IFX 1–12
515
8–7: IFX 1–12
This page lets you edit the parameters of the insert effect 1.
Use the tabs at left to select IFX1 through IFX12.
Effects Modulation: Dmod
Most effects have one or more parameters which can be
modulated in realtime. In the NAUTILUS, this is called
Dynamic Modulation, or Dmod for short.
For a complete list of Dmod sources, see “Dynamic
Modulation Source List” on page 910.
You can use different MIDI channels to control Dmod for
each effect, if desired, as selected by the
Ch (Control
Channel) parameter.
8–7a: IFX1
This configures the parameters of insert effect 1. Use the
tabs at left to select IFX1 through IFX12.
IFX Type
This selects the effect type for insert effect 1.
IFX1 On/Off [Off, On]
Turns the insert effect on/off. This is linked with the on/off
setting in the IFX– Insert FX page.
Ch (Control Channel) [Ch01…16, All Routed]
This parameter specifies the MIDI channel that will be used
to control effect dynamic modulation (Dmod), pan following
the insert effect (CC#8), Send 1, and Send 2.
The channel number of the MIDI track routed through this
IFX will be followed by a “*” displayed at the right of
Ch01–16. If two or tracks with different MIDI channel
settings are routed through the same IFX, this parameter
specifies which of these channels will be used to control the
effect.
Note: If you want to control an IFX to which an audio track
is routed, use a MIDI track whose channel matches the “Ch
(Control Channel)” of the effect you want to control.
All Routed: The channel of any MIDI track routed through
this effect can be used to control the effect. (Channels of
each routed track will be indicated by “*”.)
Drum Kits and the MIDI Control Channel
If a Timbre is using a Drum Kit, and the Timbre’s Bus Select
(IFX/Indiv. Out Assign) DKit (8–1b) is enabled, this
affects the MIDI Control Channel as well. In this case, the
Timbre’s MIDI channel will be used to control any effect
whose
Ch is set to All Routed, regardless of the Bus Select
(GLOBAL 5–3b) settings or the settings of the DrumKit
IFX Patch page menu command.
P (Effect Preset) [P00, P01…15, U00…15, ------]
This selects the effect preset.
For more information, please see “Effect preset function” on
page 103.
IFX1 Parameters
Set the parameters for the effect type selected for insert
effect 1.
For more information, please see “Insert Effects
(IFX1…IFX12)” on page 737.
8–7b: IFX2…12
This configures the parameters of insert effects 2–12.
The parameters for IFX2 through IFX12 are the same as for
IFX1. For more information, please see “8–7a: IFX1” on
page 515.
8–7PMC
8–7b
8–7a