Korg NAUTILUS Series, Parameter Manual, Page: 507 / 961

SEQUENCER > Track Edit 4–1: Track Edit
497
SEQUENCER > Track Edit
4–1: Track Edit
Here you can edit MIDI tracks, the master track, and audio
tracks.
When editing a MIDI track, you can move, insert, and delete
individual events of note or control change data, or copy,
move, insert, and delete measures or tracks. You can also
perform Step Recording in this page.
When editing the master track, you can edit the tempo and
time signature data.
You can edit audio tracks by moving/inserting/ deleting
individual data events, or by
copying/moving/inserting/deleting specified measures or
tracks.
Note: To perform track editing (or step editing), use Track
Select to select the track you want to edit, and use From
Measure and To End of Measure parameters to specify the
region that you want to edit. Then choose a command from
the page menu, and execute the edit. For details on the
specific commands, see “SEQUENCER: Page Menu
Commands” on page 521.
4–1a: Track data Map
This area shows the presence or absence of performance
data, and indicates the edit range, etc. The currently selected
Track will be highlighted.
0–1a
4–1PMC
4–1a
4–1b
MIDI Track
Master Track
Audio Track
From Measure
Master track data
Region data
Length of the entire song
MIDI data
Measure no.
Shows the From Measure and
To End of Measure regions
Patterns used
To End of Measure
Length of the entire song
Shows the left region of
measures (near From
Measure)
Locations move in
synchronization
Shows the right region of
measures (near To End of
Measure)