Korg NAUTILUS Series, Parameter Manual, Page: 887 / 961

Mono/Mono Parallel 140: Reverb - Gate
877
Gain Adjust [dB] [–Inf, –38…+24]
Sets the output gain. See “Gain Adjust [dB]” on page 764.
OUTPUT
Pan [L000…C064…R127]
Sets the stereo image.
Wet/Dry [Dry, 1:99…99:1, Wet]
Sets the balance between the effect and the dry input.
Source [Off…Tempo]
Selects a modulation source for Wet/Dry.
Amount [+/–100]
Sets the modulation amount for Wet/Dry.
Exciter
Pre EQ
Trim [0…100]
Sets the EQ input level.
LEQ Gain [dB] [–15…+15]
Sets the gain of the Low EQ.
HEQ Gain [dB] [–15…+15]
Sets the gain of the High EQ.
EXCITER
Emphasis Frequency [0…70]
Sets the frequency range to be emphasized. See “Emphasis
Frequency” on page 777.
Exciter Blend [+/–100]
Sets the intensity (depth) of the Exciter effect. See “Blend”
on page 777.
OUTPUT
Pan [L000…C064…R127]
Sets the stereo image.
Wet/Dry [Dry, 1:99…99:1, Wet]
Sets the balance between the effect and the dry input.
Source [Off…Tempo]
Selects a modulation source for Wet/Dry.
Amount [+/–100]
Sets the modulation amount for Wet/Dry.
OD/HI-GAIN
DRIVE
For more information on these parameters, see “DRIVE” on
page 790.
Drive Mode [Overdrive, Hi-Gain]
Switches between overdrive and high-gain distortion.
Drive [1…100]
Sets the degree of distortion.
Output Level [0…50]
Sets the output level.
Source [Off…Tempo]
Selects the modulation source for the output level.
Amount [–50…+50]
Sets the modulation amount of the output level.
EQ
Low Fc [Hz] [20…1.00k]
Sets the center frequency for Low EQ (shelving type).
Gain [dB] [–18…+18]
Sets the gain of the Low EQ.
Mid1 Fc [Hz] [300…10.00k]
Sets the center frequency for Mid/High EQ 1 (peaking type).
Q [0.5…10.0]
Sets the band width of Mid/High EQ 1. See “Q” on
page 774.
Gain [dB] [–18…+18]
Sets the gain of Mid/High EQ 1.
Mid2 Fc [Hz] [500…20.00k]
Sets the center frequency for Mid/High EQ 2 (peaking type).
Q [0.5…10.0]
Sets the band width of Mid/High EQ 2. See “Q” on
page 774.
Gain [dB] [–18…+18]
Sets the gain of Mid/High EQ 2.
OUTPUT
Pan [L000…C064…R127]
Sets the stereo image.
Wet/Dry [Dry, 1:99…99:1, Wet]
Sets the balance between the effect and the dry input.
Source [Off…Tempo]
Selects a modulation source for Wet/Dry.
Amount [+/–100]
Sets the modulation amount for Wet/Dry.
WAH
CONTROL
Sweep Mode [Auto, Dmod, LFO]
Selects the control from auto-wah, modulation source, and
LFO. See “Sweep Mode” on page 778.
Source [Off…Tempo]
Selects the modulation source for the wah when Sweep
Mode=Dmod.