Kingservo KSDG Series, Manual

Page: 37 / 117

KingServo 37
3-5 EEPROM Writing-in Mode
3-5-1 EEPROM Writing-in Mode
˙
Operation of Choosing Screen:
From the initial state of LED,
press three times to enter into EEPROM mode.
Now press or to set writing-in parameters of EEPROM or writing-n factory defautl value of
EEPROM.
˙ ˙ ˙ ˙
Operation of Execution Srceen:
Under option screen of , press to choose execution display.
While executing writing-in,
continuously press
until is displayed.
Modification will be effective only after it is reset. While modification of setting parameters and completion of
writing-in, sreen will display , which means that “Please first power off the driver and reopen it again!”.
<Remarks>
●
While EEPROM is writing in, do not shut down power, or else it produce errors. In case similar error
happens, reset all parameters and confirm them totally, then execute it.
● While writing in incorrectly, execute it again. If doing it several times, there are still errors, it may be
faults.