Kingservo KSDG Series, Manual

Page: 92 / 117

KingServo 92
5-2-2 Wiring Refernce of Output Loop
Line driver(Differential output) output
Encoder signals(A phase, B phase and Z phase) after division process are
outputed through line driver.
Use line receiver to receive controller side (upper-level controller). The 300
Ω
terminal resistor shall be added beween input and reception of line driver.
Non-insulated outpput.
Analog monitor output
It be divide into two types of output: speed monitor signal output(SP) and torque
monitor signal output(TM)
Output signal amplitude is ±10V.
Output impedence is 1K Ω , pay attention to input impedence of testing
instrument or external line.