Kärcher B 260 RI, Manual

Page: 26 / 324

26 English
Additional malfunctions on the Combo variant
Technical data
The cleaning results are unsatisfacto-
ry 1. Set the appropriate cleaning program for the cleaning task.
2. Use suitable brushes for the cleaning task.
3. Use a suitable detergent for the cleaning task.
4. Reduce the driving speed.
5. Adjust the contact pressure.
6. Adjust the squeegee blades.
7. Check the brushes for wear and replace if necessary.
8. Check the water output.
The brushes do not rotate 1. Reduce the contact pressure.
2. Check if the brushes are blocked by a foreign body and remove the foreign body if necessary.
The optional all-round light and/or the
working light do not light up 1. Check fuse F3, replace if necessary, (see chapter Replacing fuses ).
Error K1/109 1. Switch off the device.
2. Wait one minute.
3. Switch the device on again.
The device does not sweep properly 1. Check the roller brush and the side brushes for wear, replace if necessary.
2. If the roller brush does not turn, check the drive belt, clean if necessary.
3. Check the function of the coarse dirt flap.
4. Check the sealing strips for wear, adjust or replace if necessary.
The sweeping mechanism creates a
dust cloud 1. Empty the waste container.
2. Check the drive belts for the sweeping mechanism suction turbine.
3. Check the sealing sleeve on the suction fan.
4. Check the dust filter, clean or replace if necessary.
5. Check the filter box seal.
6. Check the sealing strip for wear, adjust or replace if necessary.
The cleaning result when sweeping in
the edge area is unsatisfactory 1. Check the height adjustment of the side brushes, adjust if necessary.
2. Replace the side brushes.
B 260 RI
(R100) B 260 RI
Combo (R100) B 260 RI
(R 120) B 260 RI
Combo (R 120) B 260 RI
(D100) B 260 RI
Combo (D100)
General
Travel speed (max.) km/h 10 10 10 10 10 10
Transport speed km/h 10 10 10 10 10 10
Reverse speed km/h 6 6 6 6 6 6
Permissible braking distance on level ground at max.
travel speed of 10 km/h m 1,9 1,9 1,9 1,9 1,9 1,9
Application time depending on brush head, brush con-
tact pressure and roughness of the ground h 5 4,5 5 4,5 5 4,5
Theoretical surface coverage m
2
/h 10000 10000 12000 12000 10000 10000
Theoretical surface coverage with side scrubbing deck m
2
/h 11200 --- --- --- 11200 ---
Theoretical surface coverage with 2 side brushes m
2
/h 11500 11500 13400 13400 11500 11500
Practical surface coverage with brush head m
2
/h 7000 7000 8400 8400 7000 7000
Fresh/waste water tank volume l 260 260 260 260 260 260
Coarse dirt container capacity l 26 26 32 32 --- ---
Detergent tank (Dose option) l 10 10 10 10 10 10
Detergent dosing range (from - to) % 0-3 0-3 0-3 0-3 0-3 0-3
Minimum water dosing quantity l/min 0,9 0,9 0,9 0,9 0,9 0,9
Maximum water dosing quantity l/min 9 9 9 9 9 9
Max. surface pressure (incl. driver, water) N/mm
2
1,33 1,33 1,33 1,33 1,33 1,33
Device performance data
Nominal voltage V 36 36 36 36 36 36
Battery capacity Ah 630 630 630 630 630 630
Mean power input W 7500 8900 7500 8900 7500 8900
Driving motor power W 2200 2200 2200 2200 2200 2200
Suction motor power W 2x840 2x840 2x840 2x840 2x840 2x840
Brush motor power W 2x 1100 2x 1100 2x 1100 2x 1100 2x 1100 2x 1100
Charging time with empty battery h 10 10 10 10 10 10
Brush roller drive power W --- 600 --- 600 --- 600
Side brushes power (option) W 110 110 110 110 110 110
Sweeping mechanism suction turbine power W --- 600 --- 600 --- 600
Vacuuming
Suction performance, air quantity l/s 28 x 2 28 x 2 28 x 2 28 x 2 28 x 2 28 x 2
Suction performance, vacuum kPa (mbar) 14 (140) 14 (140) 14 (140) 14 (140) 14 (140) 14 (140)
Filter area of dust filter m
2
--- 4 --- 4 --- 4
Vacuum turbine/suction bar kPa (mbar) 22/11 (220/110) 22/11 (220/110) 22/11 (220/110) 22/11 (220/110) 22/11 (220/110) 22/11 (220/110)
Cleaning brushes
Brush diameter mm 160 160 160 160 510 510
Brush length mm 914 914 1118 1118 --- ---
Brush speed 1/min 1250 1250 1250 1250 140 140
Side scrubbing deck brush speed 1/min 140 --- --- --- 140 ---
Side scrubbing deck brush diameter mm 300 --- --- --- 300 ---