manualshive.com logo in svg

JDS Uniphase CT-650, Reference Manual

The JDS Uniphase CT-650 Reference Manual is a comprehensive guide for users of this exceptional product. Packed with detailed instructions and information, this manual is available for free download at manualshive.com. Explore the full potential of your device with this essential resource at your fingertips.

Share
Download
background image

Appendix D

Customer Services and Support

Add-on services

CT-650 User’s Guide

Release 9.3

211

For more information, including instructions for returning equipment 
for repair and/or calibration, go to: 

www.jdsu.com/en-us/Test-and-

Measurement/support/repair-and-calibration/Pages/default.aspx

.

Technical

assistance

(business hour)

Expert business hour technical support is provided with your product. 
For assistance related to the use of your product, call or e-mail JDSU’s 
Technical Assistance Center (TAC) in your region. For a current listing 
of TAC phone numbers and e-mail addresses, go to: 

www.jdsu.com/

en-us/Test-and-Measurement/support/technical-assistance/Pages/
default.aspx

.

For information about optional 24x7 technical assistance, see 

“Extended product and systems support services” on page 212

.

Warranty

information

Information about standard warranties, terms, and conditions specific 
to JDSU’s Test & Measurement products and third party software that 
may be included within such products is posted on the JDSU Web site. 
For more information, go to: 

www.jdsu.com/terms

.

Product

documentation

library

An extensive library that includes documentation for JDSU products 
and related technology-specific documents is available on the JDSU 
Web site. For more information, go to: 

www.jdsu.com/en-us/Test-and-

Measurement/support/Technical-Library/Pages/TechLibrary.aspx

.

Add-on services

JDSU offers a broad portfolio of add-on services to enable customers 
to aggressively build their competitive advantage within the markets 
they serve. Available services include:

Summary of Contents for CT-650

























































































































































































































































Reviews:

No comments

Related manuals for CT-650

ABB E-Hub 2.0 Getting Started preview
E-Hub 2.0
Brand: ABB Pages: 18
R-Tech X5 Quick Manual preview
X5
Brand: R-Tech Pages: 3
Xebex Fitness ASK Owner'S Manual preview
ASK
Brand: Xebex Fitness Pages: 15
qeedo Buddy Manual preview
Buddy
Brand: qeedo Pages: 2
ICP DAS USA I-2533T-FD User Manual preview
I-2533T-FD
Brand: ICP DAS USA Pages: 45
Velp Scientifica ECO 8 Operation Manual preview
ECO 8
Brand: Velp Scientifica Pages: 12
Yamaha D24 Upgrade Manual preview
D24
Brand: Yamaha Pages: 24
J&M Nitro Gro 5010 Assembly Manual preview
Nitro Gro 5010
Brand: J&M Pages: 33
Kärcher SC 2 Deluxe EasyFix Operating Instructions Manual preview
SC 2 Deluxe EasyFix
Brand: Kärcher Pages: 12
Kärcher KM 70/15 C Manual preview
KM 70/15 C
Brand: Kärcher Pages: 16
Rainbow Super Funhouse Assembly Instructions Manual preview
Super Funhouse
Brand: Rainbow Pages: 35
Rain Harvesting Air Gap Installation And Specification Manual preview
Air Gap
Brand: Rain Harvesting Pages: 2
Feniex FUSION FN-1116 Instruction Manual preview
FUSION FN-1116
Brand: Feniex Pages: 5
Carbatec TH-B317P Owner'S Manual preview
TH-B317P
Brand: Carbatec Pages: 29
PurAthletics BALANCE DISC Instructions preview
BALANCE DISC
Brand: PurAthletics Pages: 2
Falcon Haymakers Hooimakers F80-350V Operator'S Manual preview
Haymakers Hooimakers F80-350V
Brand: Falcon Pages: 38
Lightronics FXLE17C4N Owner'S Manual preview
FXLE17C4N
Brand: Lightronics Pages: 6
Neopost IM 30 Operator'S Manual preview
IM 30
Brand: Neopost Pages: 10

Brands by name

Popular brands

Load more brands