Chapter 9
Supervisor Commands
Descriptions of supervisory commands
CT-650 Command-Line Reference Guide
Release 9.4
91
System Name
Name of DCS associated with the RTU.
N/A
appears if the RTU is not con-
figured for a DCS.
DCS TP Number
The DCS test port number connected to the RTU. If the RTU is not config-
ured for DCS testing, the field is
N/A
. For dual-FAD configurations, ensure
that the same test port number appears on both sides of the test card.
DT3 Name
Name of the connection between the RTU and the DCS. This name
appears when a system name is required for the test commands. This field
is available only when the RTU is not assigned to a DCS. If the RTU is
assigned to a DCS,
N/A
appears.
Framing
Default framing mode for the idle condition when the RTU is not in use.
Idle Condition
Pattern transmitted when the RTU is not in use. Possible values are as fol-
lows:
–
111 (All Ones)
DCS keepalive pattern is transmitted with the
default framing.
–
x1C (Hexadecimal)
x1C pattern is transmitted.
–
LLB (Local Loopback)
Regenerated receive signal is transmitted
through the RTU.
–
1100 (IDLE)
Transmits a DCS keep-alive pattern with the default
framing.
–
THRU
Retransmits received data to the transmit lines.
TX Level
The transmit signal level. Select
HIGH
for cable lengths from 225 feet to
450 feet. Select
DSX
for cable lengths of less than 225 feet.
Timing Source
The timing source for the DT3 transmitters. If the idle condition is set to
LOCAL LOOPBACK
and an idle condition occurs, the timing source defaults
to
RECOVERED
.
Transmitter Wir-
ing
The wiring for the DT3 transmitters:
Normal
and
Cross Wired
.
Parameter
Definition
Summary of Contents for CT-650
