Chapter
Operation
XINO
®
S700
Rev. 1.01 Technical changes reserved.
page 6-8
© Janich & Klass Computertechnik GmbH, Wuppertal, 2015
6
6.2.3
Softkeys
There are two types of keys or buttons:
•
Action buttons trigger an action. Pressing the button again during execution
aborts this action.
•
Status buttons change an operating state variable of the scanner. These can
be recognized by their blue frame when active.
The most important setting options are described below:
The feeder processes paper stacks, also called
sheet batches
, of up to 500 sheets. This setting
enables you to preselect the stacking height in
order to optimize the time for lifting and lowering
the feeder tray when processing smaller sheet
batches.
The selected option is marked in blue.
The
single sheet
mode is intended for
scanning single sheets. For this, the feeder tray
is moved all the way up. Single sheets are
processed by being pushed underneath the
feed roller. The selected option is marked in
blue and the activation of this function is
indicated in the upper status bar by means of
the following icon:
This function is used to manually raise or lower
the feeder tray during normal scanning
operation. This way, sheets can be added to the
existing paper stack later on.
This function switches the
feed separation
on
or off. When feed separation is activated, this
button is marked in blue. The status of this
setting is indicated in the upper status bar by
means of the following icons:
