Janich & Klass XINO S700 Series Translation Of The Original Operating Instructions Download

Page: 28 / 149

Chapter

Safety

XINO

S700

Rev. 1.01 Technical changes reserved.

page 3-2

3.5

Personnel qualifications

The individual activities at the scanner demand different personnel qualifications,

which are listed in the table below.

The user is to ensure that no unauthorized person works at or with the scanner.

The user is obliged to report any changes in the operating behaviour of the scanner

possibly compromising the safety to the operating company.

The different qualifications comprise the following knowledge, skills and abilities:

•

Users must have been instructed on how to use the scanner and detect

potential damages or dangers at the scanner by expert staff from microform

GmbH,

Janich & Klass Computertechnik GmbH or an external service provider

commissioned by either company.

•

The term service technicians denotes expert staff from microform GmbH,

Janich & Klass Computertechnik GmbH or external service providers

commissioned by either company, qualified to carry out assembly,

maintenance and repair work at the scanner as well as troubleshooting.

Tab. 3-1

Overview of the min. required personnel qualifications

Activities User

Service

technician

Transport

Short distance transport (on the same office

floor)

Set-up, assembly

Installation

Operation

Cleaning according to chapter 8.3.1

Maintenance according to chapter 8

Troubleshooting according to chapter 7

Troubleshooting, repair

Work on the electrical system:

Troubleshooting, repair, maintenance

Summary of Contents for XINO S700 Series






















































































































































Search results

Summary of Contents for XINO S700 Series

Reviews:

Related manuals for XINO S700 Series

Brands by name

Popular brands

Janich & Klass XINO S700 Series, Translation Of The Original Operating Instructions

Search results

Summary of Contents for XINO S700 Series

Reviews:

Related manuals for XINO S700 Series

Brands by name

Popular brands