Janich & Klass XINO S700 Series Translation Of The Original Operating Instructions Download

Page: 18 / 149

Chapter

Technical information

XINO

S700

Rev. 1.01 Technical changes reserved.

page 2-4

2.1.1.2

Rear paper stacker

Fig. 2-2

Rear paper stacker

If the paper output is at the rear, the sheets are not turned during transport. This

means that, depending on the perspective, the stacked paper stack is either sorted

in reverse order or after turning it around each page is facing the other way.

Nonetheless, this form of paper stacking can be useful. Possible application

scenarios are described below:

•

a customer-specific paper collection system is located behind the scanner

•

to avoid kinks when scanning sensitive or particularly thick paper

•

manual separation of paper (stacks) during scanning

Summary of Contents for XINO S700 Series






















































































































































Search results

Summary of Contents for XINO S700 Series

Reviews:

Related manuals for XINO S700 Series

Brands by name

Popular brands

Janich & Klass XINO S700 Series, Translation Of The Original Operating Instructions

Search results

Summary of Contents for XINO S700 Series

Reviews:

Related manuals for XINO S700 Series

Brands by name

Popular brands