Janich & Klass XINO S700 Series Translation Of The Original Operating Instructions Download

Page: 133 / 149

Rev. 1.01 Technical changes reserved.
© Janich & Klass Computertechnik GmbH, Wuppertal, 2015

page 8-11

XINO

S700

Maintenance

Chapter

8.3.2

Replacing the roller coating

Once the grip of the roller coating lessens, it must be replaced in order to ensure the

failure-free paper transport.

8.3.2.1

Replacing the coating of the feed rollers

In order to replace the roller coating of the feed rollers, the feed roller unit needs to

be removed as described in chapter 8.3.1.4.1, page 8-5.

Place the roller unit in your hand in a way that both fasteners point towards

you. Then use e.g. a pen to press those two fasteners down one by one until

they unlatch.

Fig. 8-15 Opening the roller unit

Completely open the unit and remove the rollers.

Fig. 8-16 Removing the rollers

Summary of Contents for XINO S700 Series






















































































































































Search results

Summary of Contents for XINO S700 Series

Reviews:

Related manuals for XINO S700 Series

Brands by name

Popular brands

Janich & Klass XINO S700 Series, Translation Of The Original Operating Instructions

Search results

Summary of Contents for XINO S700 Series

Reviews:

Related manuals for XINO S700 Series

Brands by name

Popular brands