Janich & Klass XINO S700 Series Translation Of The Original Operating Instructions Download

Page: 51 / 149

Rev. 1.01 Technical changes reserved.
© Janich & Klass Computertechnik GmbH, Wuppertal, 2015

page 6-15

XINO

S700

Operation

Chapter

6.3

Configuration

Press the configuration button in the lower section of the screen to access the

configuration screen.

Here settings regarding paper transport, management, settings, maintenance and

system settings can be made.

6.3.1

Paper transport

Select the menu

paper transport

in the configuration menu.

The following screen appears:

Fig. 6-2

Configuration screen – paper transport

PLEASE

NOTE:

The functions described in this chapter are only available with

administrator rights.

Save the changes by pressing the

confirm button

If you do not want to adopt the changes, discard them by means of the

cancel action

button.

Unsaved changes will be lost when switching the scanner off!

Summary of Contents for XINO S700 Series






















































































































































Search results

Summary of Contents for XINO S700 Series

Reviews:

Related manuals for XINO S700 Series

Brands by name

Popular brands

Janich & Klass XINO S700 Series, Translation Of The Original Operating Instructions

Search results

Summary of Contents for XINO S700 Series

Reviews:

Related manuals for XINO S700 Series

Brands by name

Popular brands