Janich & Klass XINO S700 Series Translation Of The Original Operating Instructions Download

Page: 66 / 149

Chapter

Operation

XINO

S700

Rev. 1.01 Technical changes reserved.

page 6-30

6.3.2.1.1

Ready display

The screen content to be displayed with the

status ready

can be defined in this

screen. Various functions can be set and adjusted at the scanner prior to scanning,

provided the

status

ready

. The following illustrations are examples only and may

differ from the actual displays.

Fig. 6-15

Edit layout: ready

Each of the 10 button positions can be freely assigned. To do so, please proceed as

follows:

Press the desired button position.

• A selection screen appears.

Fig. 6-16

Select a new command

Use the arrow keys to scroll through the list of functions until the required

function is displayed.

Press on the icon of the desired function.

• The selected icon will be marked in blue.

Save your selection by pressing the confirm button.

Summary of Contents for XINO S700 Series






















































































































































Search results

Summary of Contents for XINO S700 Series

Reviews:

Related manuals for XINO S700 Series

Brands by name

Popular brands

Janich & Klass XINO S700 Series, Translation Of The Original Operating Instructions

Search results

Summary of Contents for XINO S700 Series

Reviews:

Related manuals for XINO S700 Series

Brands by name

Popular brands