Chapter
Maintenance
XINO
®
S700
Rev. 1.01 Technical changes reserved.
page 8-14
© Janich & Klass Computertechnik GmbH, Wuppertal, 2015
8
8.3.3
Replacing the ink cartridge
The scanner emits a warning message when the ink cartridge needs to be replaced.
For the replacement of the ink cartridge please proceed as follows:
1.
Switch off the scanner (see chapter 6.1, page 6-1).
2.
Remove the print head from the retainer.
Fig. 8-20 Removing the print head
3.
Remove the old ink cartridge by lifting the latch at the print head retainer and
pulling the cartridge out to the side.
Fig. 8-21 Removing the ink cartridge
4.
Take a new ink cartridge from its packaging and remove the adhesive
masking tape from the print head.
5.
Insert a new ink cartridge by lifting the latch at the print head retainer and
pushing the cartridge in from the side.
