Janich & Klass XINO S700 Series Translation Of The Original Operating Instructions Download

Page: 17 / 149

Rev. 1.01 Technical changes reserved.
© Janich & Klass Computertechnik GmbH, Wuppertal, 2015

page 2-3

XINO

S700

Technical information

Chapter

2.1.1

Paper transport

2.1.1.1

Top paper stacker

Fig. 2-1

Top paper stacker

Operation with the paper output at the top is the normal operating mode for most

application cases. This operating mode comes with the following advantages:

•

Sheets can be inserted and removed without having to move around the

scanner.

•

The sequence and positioning (face up or down) of the scanned pages

remains intact.

Summary of Contents for XINO S700 Series






















































































































































Search results

Summary of Contents for XINO S700 Series

Reviews:

Related manuals for XINO S700 Series

Brands by name

Popular brands

Janich & Klass XINO S700 Series, Translation Of The Original Operating Instructions

Search results

Summary of Contents for XINO S700 Series

Reviews:

Related manuals for XINO S700 Series

Brands by name

Popular brands