Janich & Klass XINO S700 Series Translation Of The Original Operating Instructions Download

Page: 12 / 149

Chapter

General information

XINO

S700

Rev. 1.01 Technical changes reserved.

page 1-2

1.2

Legal information

1.2.1

Copyright and licence

written consent any reproduction, adaptation or translation going beyond the legal

framework provided by copyright law is prohibited. The user of the scanner described

in this manual is granted a licence for the following purposes:

•

printing this user manual for personal, internal or commercial use, but with

the restriction of not selling or otherwise distributing these print-outs.

•

placing an electronic copy of this user manual on a network server, provided

that it can only be accessed by the personal and internal users of the scanner

as described in this manual.

XINO

is a registered trademark of Janich & Klass Computertechnik GmbH and their

1.2.2

Liability limitations

The information provided in this document is subject to change without prior notice.

Janich & Klass Computertechnik GmbH denies any warranty claims appertaining to

this material, including however not limited to the implied warranty regarding

marketability and suitability for a certain purpose.

Janich & Klass Computertechnik GmbH assumes no guarantee for the manual at

hand and cannot be held liable for any errors contained in it or for any consequential

damages resulting from the use of this manual.

Summary of Contents for XINO S700 Series






















































































































































Search results

Summary of Contents for XINO S700 Series

Reviews:

Related manuals for XINO S700 Series

Brands by name

Popular brands

Janich & Klass XINO S700 Series, Translation Of The Original Operating Instructions

Search results

Summary of Contents for XINO S700 Series

Reviews:

Related manuals for XINO S700 Series

Brands by name

Popular brands