Janich & Klass XINO S700 Series Translation Of The Original Operating Instructions Download

Page: 105 / 149

Rev. 1.01 Technical changes reserved.
© Janich & Klass Computertechnik GmbH, Wuppertal, 2015

page 6-69

XINO

S700

Operation

Chapter

6.4.4

Changing the scanning background

The scanner comes with an exchangeable scanning background in order to process

very thin, transparent sheets as well.

The scanning background is the surface at which the front-side scanner "looks".

The scanning background can be changed from black to white.

In order to exchange the scanning background, please proceed as follows:

Open the scanning area as described in chapter 7.2.1.1, page 7-3.

Lift the scanning background on the left-hand side.

Fig. 6-63

Exchanging the scanning background 1

Then remove the scanning background.

Fig. 6-64

Exchanging the scanning background 2

Turn the scanning background in a way that the desired surface points

upwards.

Fig. 6-65

Exchanging the scanning background 3

Summary of Contents for XINO S700 Series






















































































































































Search results

Summary of Contents for XINO S700 Series

Reviews:

Related manuals for XINO S700 Series

Brands by name

Popular brands

Janich & Klass XINO S700 Series, Translation Of The Original Operating Instructions

Search results

Summary of Contents for XINO S700 Series

Reviews:

Related manuals for XINO S700 Series

Brands by name

Popular brands