Janich & Klass XINO S700 Series Translation Of The Original Operating Instructions Download

Page: 101 / 149

Rev. 1.01 Technical changes reserved.
© Janich & Klass Computertechnik GmbH, Wuppertal, 2015

page 6-65

XINO

S700

Operation

Chapter

Mounting the feeder

Hold the feeder on both sides and insert it evenly. Check the contact surface

of feeder and feeder drawer. The feeder must be positioned parallel to the

drawer.

The electrical connection plugs must be aligned without tilting.

Then carefully lower the feeder. Ensure its horizontal position, when it snaps

into place.

Fig. 6-57

Mounting the feeder 1

Lift the snap-fit retaining bracket (20) and push the feeder up against the

scanner until it clicks into place.

Fig. 6-58

Mounting the feeder 2

Switch the scanner back on (chapter 6.1.1, page 6-1).

Summary of Contents for XINO S700 Series






















































































































































Search results

Summary of Contents for XINO S700 Series

Reviews:

Related manuals for XINO S700 Series

Brands by name

Popular brands

Janich & Klass XINO S700 Series, Translation Of The Original Operating Instructions

Search results

Summary of Contents for XINO S700 Series

Reviews:

Related manuals for XINO S700 Series

Brands by name

Popular brands