Rev. 1.01 Technical changes reserved.
© Janich & Klass Computertechnik GmbH, Wuppertal, 2015
page 6-13
XINO
®
S700
Operation
Chapter
6
Pressing the
start
button at the scanner display
starts the scanning process.
A condition is that you use the scan software
DpuScan, XINOCapture included in the scope
of delivery.
Pressing the
stop
button at the scanner display
stops the scanning process.
Pressing the
pause
button at the scanner
display interrupts the scanning process, which
can then be continued by pressing the
start
button.
The
cancel
button terminates batch
processing.
The button
confirmed warning or error
message
can be used to confirm the errors or
warnings, which still allow the scanning process
to be continued (e.g. a low ink level).
Counters
cannot be actively operated, they
serve to document the scanning process.
The set-up of counters belongs to the driver
configuration and is hence described there.
Endorsers / imprinters
cannot be actively
operated, they serve to document the scanning
process.
The set-up of endorsers / imprinters belongs to
the driver configuration and is hence described
there.
By use of the
change language
button you can
switch between the available system
languages.
The
system information
button can be used to
retrieve system information about the scanner.
