Chapter
Operation
XINO
®
S700
Rev. 1.01 Technical changes reserved.
page 6-6
© Janich & Klass Computertechnik GmbH, Wuppertal, 2015
6
6.2.2
Screen layout
The screen content can be divided into three sections:
Upper section
Located in the upper section is the status bar. Displayed in the status bar is the name
of the current screen and the status of important operational settings in form of icons.
The colour of the status bar indicates the scanner's current status:
Middle section
The middle section contains the softkeys by means of which different operating
parameters of the scanner can be set and adjusted.
Information texts and counters can also be displayed in this area in addition to the
softkeys.
This section can be configured individually.
Lower section
Depending on the status different action buttons (start/pause/stop or confirm/cancel,
indicate warning), the button for the settings menu or buttons to change the screen
levels are located in the lower section.
Moreover, details on error messages providing clues for troubleshooting are
displayed here.
grey =
the scanner is ready
red =
an error has occurred – the error number will be displayed
yellow = a warning has been issued
