Janich & Klass XINO S700 Series Translation Of The Original Operating Instructions Download

Page: 129 / 149

Rev. 1.01 Technical changes reserved.
© Janich & Klass Computertechnik GmbH, Wuppertal, 2015

page 8-7

XINO

S700

Maintenance

Chapter

8.3.1.4.2

Removing / inserting the feed rollers (left-hand paper feed)

Remove the first feed roller.

Fig. 8-7

Removing the first feed roller

Remove the second feed roller.

Fig. 8-8

Removing the second feed roller

Clean the rollers with a cloth moistened with cleaning agent or replace the

feed rollers, if required.

Put the second feed roller back in.

Fig. 8-9

Inserting the second feed roller

Summary of Contents for XINO S700 Series






















































































































































Search results

Summary of Contents for XINO S700 Series

Reviews:

Related manuals for XINO S700 Series

Brands by name

Popular brands

Janich & Klass XINO S700 Series, Translation Of The Original Operating Instructions

Search results

Summary of Contents for XINO S700 Series

Reviews:

Related manuals for XINO S700 Series

Brands by name

Popular brands