background image

Explains about troubleshooting.

Explains how to replace consumables.

Explains how to configure settings by using 
the Software Operation Panel.

Explains how to use the Operator Panel.

Explains how to load documents on the 
scanner.

Explains about various ways of scanning.

Explains how to clean the scanner.

Explains the names and functions of parts 
and basic scanner operation.

fi-6400/fi-6800

Image Scanner

Appendix

Glossary

Contents

TOP

How to Load 
Documents

How to Use 
the Operator 
Panel

Various Ways 
to Scan

Daily Care

Troubleshooting

Operational 
Settings

Replacing 
Consumables

P3PC-2492-05ENZ0

Scanner 
Overview

How to Use This Manual

Introduction

Index

Operator’s Guide

Thank you for purchasing the fi-6400/fi-6800 Color Image Scanner.
This manual explains about the basic operations and handling of this product.
For information on scanner installation, connection, and uninstalling the software, refer to the 
“Getting Started” guide.

Summary of Contents for fi-6400















































































































































































































Reviews: