Janich & Klass XINO S700 Series Translation Of The Original Operating Instructions Download

Page: 147 / 149

Rev. 1.01 Technical changes reserved.
© Janich & Klass Computertechnik GmbH, Wuppertal, 2015

page 12-1

XINO

S700

Wear parts and accessories

Chapter

Wear parts and accessories

NOTICE!

Using incorrect or defective spare and wear parts can lead to damages, malfunctions

or total failure of the scanner.

The use of non-approved spare parts voids all warranty, service, damage and liability

claims against the manufacturer or his

agents, dealers and representatives.

Only use original spare parts from the manufacturer!

Tab. 12-1 Wear parts and accessories

Item

no.

Designation

Qty.

Order no.

Remark

cleaning liquid – glass

200 ml

9999/998

cleaning liquid – feed rollers

200 ml

9999/999

separation roller coatings, set with 2 pcs

e0073150

feed roller green fluted, set with 2 pcs

e0073053

feed roller green smooth, set with 4 pcs

e0073050

white balance paper

994.982100.000.4

Summary of Contents for XINO S700 Series






















































































































































Search results

Summary of Contents for XINO S700 Series

Reviews:

Related manuals for XINO S700 Series

Brands by name

Popular brands

Janich & Klass XINO S700 Series, Translation Of The Original Operating Instructions

Search results

Summary of Contents for XINO S700 Series

Reviews:

Related manuals for XINO S700 Series

Brands by name

Popular brands