Chapter
Errors and faults
XINO
®
S700
Rev. 1.01 Technical changes reserved.
page 7-2
© Janich & Klass Computertechnik GmbH, Wuppertal, 2015
7
7.2.1
Clearing a paper jam
In case of a paper jam the paper needs to be removed from the paper transport by
hand and then refed.
If the scanner is operated with an active "rear paper output", paper jams can only
occur in the scanning area or at the outlet slide.
In order to clear the paper jam, please proceed as follows:
1.
Acknowledge the error message via the touch screen.
2.
Press the
clear paper transport
button
.
• If in the process of clearing the paper transport noises occur, which
indicate a paper jam, abort the process by pressing the
clear paper
transport
button
again!
• All stacked sheets must be scanned anew.
3.
If necessary, open the scanner to ensure that no sheets remain in the
scanner (see chapter 7.2.1.1, chapter 7.2.1.2 and chapter 7.2.1.3).
4.
Check the PC screen for the last sheet scanned and place all unscanned
sheets on the stack in the feeder in the correct order.
5.
Resume the scanning process.
In case of frequently occurring paper jams, reduce the scan speed or
increase the sheet distance (gap; see chapter 6.3.1.1, page 6-16).
