Rev. 1.01 Technical changes reserved.
© Janich & Klass Computertechnik GmbH, Wuppertal, 2015
page 6-63
XINO
®
S700
Operation
Chapter
6
6.3.5.4
White balance
Pressing the
white balance
button opens the white balance screen.
This screen serves for the white balance.
The white balance needs to be performed after adjustment work at optical
components (e.g. the camera). Therefore, as a rule, the white balance is only carried
out by a service technician.
Further information on how to carry out a white balance is provided in chapter
"Performing a white balance", page 8-16.
Fig. 6-54
White balance
Speed
All
White balance will be performed at any
speed.
Current
White balance will be performed at the
currently set speed level.
Mode
All
Other functions, e.g. gain factor, will also be
recalibrated.
White balance
only
Only a white balance is performed.
Sides
Front side
The white balance is only performed for front
sides.
Rear side
The white balance is only performed for rear
sides.
Both sides
The white balance is performed for both front
and rear sides.
