Janich & Klass XINO S700 Series Translation Of The Original Operating Instructions Download

Page: 134 / 149

Chapter

Maintenance

XINO

S700

Rev. 1.01 Technical changes reserved.

page 8-12

Pull the worn roller coating sideways off the rollers.

Slide on new roller coatings.

Make sure that the coating is positioned evenly inside the guide of the roller.

Fig. 8-17 Replacing the roller coating

Place the rollers back in the retainer and close it with light pressure until the

fasteners snap shut.

Fig. 8-18 Closing the roller unit

Then reinsert the feed roller unit as described in chapter 8.3.1.4.1, page 8-5.

PLEASE

NOTE:

Only use the original roller coating from the manufacturer.

The grip of the roller coating is designed for normal paper. There are

alternative roller coatings for special requirements.

For further information in this regard please contact your service

technician.

Summary of Contents for XINO S700 Series






















































































































































Search results

Summary of Contents for XINO S700 Series

Reviews:

Related manuals for XINO S700 Series

Brands by name

Popular brands

Janich & Klass XINO S700 Series, Translation Of The Original Operating Instructions

Search results

Summary of Contents for XINO S700 Series

Reviews:

Related manuals for XINO S700 Series

Brands by name

Popular brands