Rev. 1.01 Technical changes reserved.
© Janich & Klass Computertechnik GmbH, Wuppertal, 2015
page 6-1
XINO
®
S700
Operation
Chapter
6
6
Operation
6.1
Switch-on/off
6.1.1
Switch-on
1.
Switch the mains switch (14) to position 1.
• The loading screen appears.
2.
Wait until the main menu is displayed (approx. 30 seconds).
• The scanner is ready for operation.
3.
Start the PC.
4.
Start the scan software.
5.
Log into the system, provided the user administration is active.
6.1.2
Stand-by mode
1.
Press and hold the power button (10) for several seconds.
• The scanner switches to stand-by mode.
2.
Wait for at least 60 seconds, before moving on to the next step.
3.
Press the power button (10) again to exit stand-by mode.
6.1.3
Switch-off
1.
Quit the scan software and shut down the PC.
2.
Switch the mains switch (14) to position 0.
3.
Wait for at least 60 seconds, before switching the scanner back on.
PLEASE
NOTE:
If scanner and PC are connected via
SCSI
, do
not
start the PC
until
the scanner is ready for operation!
If scanner and PC are connected via
USB
, both can be started in any
order you choose.
