Janich & Klass XINO S700 Series Translation Of The Original Operating Instructions Download

Page: 126 / 149

Chapter

Maintenance

XINO

S700

Rev. 1.01 Technical changes reserved.

page 8-4

8.3.1.4

Cleaning transport rollers

Over time paper transport inevitably leads to dirt accumulation at the transport

rollers. One consequence of this may be that sheets get dirty during scanning. Also

with an increasing contamination level the paper transport changes for the worse,

which results in more frequent paper jams and other faults.

NOTICE!

Use a soft, lint-free cloth to clean the transport rollers. Do not use paper towels!

Only use the cleaning agent specifically designed for cleaning the rollers!

Otherwise there might be damage at the transport rubber coating, resulting in all

warranty claims being voided!

Summary of Contents for XINO S700 Series






















































































































































Search results

Summary of Contents for XINO S700 Series

Reviews:

Related manuals for XINO S700 Series

Brands by name

Popular brands

Janich & Klass XINO S700 Series, Translation Of The Original Operating Instructions

Search results

Summary of Contents for XINO S700 Series

Reviews:

Related manuals for XINO S700 Series

Brands by name

Popular brands