Janich & Klass XINO S700 Series Translation Of The Original Operating Instructions Download

Page: 119 / 149

Rev. 1.01 Technical changes reserved.
© Janich & Klass Computertechnik GmbH, Wuppertal, 2015

page 7-5

XINO

S700

Errors and faults

Chapter

Closing the scanning
area

WARNING!

Crush hazard.

Hand crush hazard when closing the scanning area.

Keep your hands away from the danger area and make sure that no other person is

situated at the scanner!

In order to close the scanner again, please proceed as follows:

Slightly lift the upper section of the scanning area to unlock the release lever.

Fig. 7-4

Closing the scanning area 1

Shut the upper section of the scanning area in a fluid movement until it clicks

into place.

Fig. 7-5

Closing the scanning area 2

Click

Summary of Contents for XINO S700 Series






















































































































































Search results

Summary of Contents for XINO S700 Series

Reviews:

Related manuals for XINO S700 Series

Brands by name

Popular brands

Janich & Klass XINO S700 Series, Translation Of The Original Operating Instructions

Search results

Summary of Contents for XINO S700 Series

Reviews:

Related manuals for XINO S700 Series

Brands by name

Popular brands