Janich & Klass XINO S700 Series Translation Of The Original Operating Instructions Download

Page: 100 / 149

Chapter

Operation

XINO

S700

Rev. 1.01 Technical changes reserved.

page 6-64

6.4

Settings

6.4.1

Exchanging the feeder

A feeder with a central or left-hand paper feed may be mounted to the scanner as

needed.

To exchange the feeder, please proceed as follows:

Removing the feeder

Switch off the scanner according to chapter 6.1.3, page 6-1.

First pull the feeder out towards the front until the snap-fit retaining

bracket (20) latches on the left-hand side.

Fig. 6-55

Removing the feeder 1

Hold the feeder on both sides and lift it out evenly towards the top.

Fig. 6-56

Removing the feeder 2

Put the feeder aside on an empty, level surface.

Summary of Contents for XINO S700 Series






















































































































































Search results

Summary of Contents for XINO S700 Series

Reviews:

Related manuals for XINO S700 Series

Brands by name

Popular brands

Janich & Klass XINO S700 Series, Translation Of The Original Operating Instructions

Search results

Summary of Contents for XINO S700 Series

Reviews:

Related manuals for XINO S700 Series

Brands by name

Popular brands