Janich & Klass XINO S700 Series Translation Of The Original Operating Instructions Download

Page: 32 / 149

Chapter

Safety

XINO

S700

Rev. 1.01 Technical changes reserved.

page 3-6

3.8

Residual risks

WARNING!

Risk of injury from falling worktops.

The improper attachment or detachment of the worktops can lead to injuries due to

falling or breaking.

The worktops may break due to overload.

•

Have both assembly and disassembly carried out by service technicians!

•

Make sure that nobody is located underneath the worktops!

•

The permissible maximum load of 50 kg per worktop must not be exceeded!

•

Do not support yourself or lean against the worktops!

•

Do not stand or sit on the worktops!

•

Distribute the load evenly!

Summary of Contents for XINO S700 Series






















































































































































Search results

Summary of Contents for XINO S700 Series

Reviews:

Related manuals for XINO S700 Series

Brands by name

Popular brands

Janich & Klass XINO S700 Series, Translation Of The Original Operating Instructions

Search results

Summary of Contents for XINO S700 Series

Reviews:

Related manuals for XINO S700 Series

Brands by name

Popular brands