Rev. 1.01 Technical changes reserved.
© Janich & Klass Computertechnik GmbH, Wuppertal, 2015
page 6-25
XINO
®
S700
Operation
Chapter
6
Press the screen level button to change the screen level. The following screen
appears:
Fig. 6-11
Paper output 3
To be determined in this screen is whether a detected patch code triggers an
extended sorting function. For instance: sheets following a patch code can be
stacked either to the top or to the rear.
Function patch code 1
Function patch code 2
Function patch code 3
Function patch code 4
Function patch code 6
Function patch code T
No
The detected patch code defined here does
not trigger a function and is stacked
according to the setting in the paper
output 2 screen (fig. 6-10).
One sheet
to the top
The sheet following the patch code is
stacked towards the top. All subsequent
sheets are stacked according to the setting
in the paper output 2 screen (fig. 6-10).
One sheet
to the rear
The sheet following the patch code is
stacked towards the rear. All subsequent
sheets are stacked according to the setting
in the paper output 2 screen (fig. 6-10).
All sheets
to the rear
All sheets following the patch code are
stacked to the rear.
All sheets
to the top
All sheets following the patch code are
stacked towards the top.
Terminate
sorting
Sorting will be terminated after the patch
code has been detected.
All subsequent sheets are stacked
according to the setting of the mode option
in the paper output 1 screen (fig. 6-9).
