Chapter
Operation
XINO
®
S700
Rev. 1.01 Technical changes reserved.
page 6-12
© Janich & Klass Computertechnik GmbH, Wuppertal, 2015
6
User profile
By means of these buttons you can switch
between two possible user profiles. User
profiles are individual profiles assigned to the
signed in user. In it one can save e.g. a
personalized screen configuration or scanner
setting.
The button of the selected profile is edged in
blue.
The used profile is also displayed in the status
bar with the corresponding icon:
If changes to a profile have not yet been saved,
this is indicated by a red mark in the icon in the
status bar:
These buttons are used to change the
scan
speed
.
Depending on the scanner version the following
speed levels are available and can be adjusted
during the scanning process:
100 sheets/min, 130 sheets/min,
160 sheets/min and 200 sheets/min.
Speed levels not available for this scanner are
disabled and greyed out.
When this function is activated, this button is
marked in blue.
The status of this setting is indicated in the
upper status bar by means of the icon
corresponding to the selection:
When pressing the button "
clear paper
transport
" after a fault, all sheets are stacked
from the scanner. After a specified time paper
transport is stopped automatically. Paper
transport can also be stopped prematurely by
repeated actuation of this button.
Bear in mind, that the stacked sheets
afterwards have to be scanned again!
/
/
/
/
/
