Janich & Klass XINO S700 Series Translation Of The Original Operating Instructions Download

Page: 107 / 149

Rev. 1.01 Technical changes reserved.
© Janich & Klass Computertechnik GmbH, Wuppertal, 2015

page 6-71

XINO

S700

Operation

Chapter

6.4.5

Setting the sheet former

6.4.5.1

Sheet former

Folded paper can easily fold back or over upon stacking and so interfere with the

orderly stacking of the subsequent sheets. To prevent this a sheet former is located

in the upper paper output, which stabilizes the sheets by slightly bending them.

There are, however, a few instances where the application of a sheet former is rather

undesirable.

In order to switch the sheet former on or off, please proceed as follows:

Lift the upper cover and fold it back completely.

Fig. 6-68

Opening the upper cover

To switch the sheet former off, press the lever down.

To switch the sheet former on, pull the lever up.

Fig. 6-69

Switching the sheet former on/off

Then close the cover again.

Summary of Contents for XINO S700 Series






















































































































































Search results

Summary of Contents for XINO S700 Series

Reviews:

Related manuals for XINO S700 Series

Brands by name

Popular brands

Janich & Klass XINO S700 Series, Translation Of The Original Operating Instructions

Search results

Summary of Contents for XINO S700 Series

Reviews:

Related manuals for XINO S700 Series

Brands by name

Popular brands