![background image](http://html2.mh-extra.com/html/icom/id-31a-plus/id-31a-plus_advanced-manual_4733647035.webp)
4
D-STAR OPERATION
4-11
D
Using TX History
TX History saves the repeater and station name and
call sign of up to 20 “TO” (Destination) settings that
were used when you made the calls
NOTE:
Until you make a call in the DV mode,
you cannot select “TO” (destination) from the TX
History
Example:
Selecting the “Kirkland (IA)” repeater in the
TX History
1 Hold down [DR] for 1 second to display the DR
screen
2
Push [RX→CS] to select “TO,” then push [ENT].
3 Select “TX History”
4 Select a destination repeater
•
Returns to the DR screen, and “Kirkland (IA)” is
displayed in “TO”
TIP:
You can add the TX HISTORY data to
memory, or delete it from the TX HISTORY screen,
push [QUICK], then select the option
D
Directly entering (UR)
The destination station call sign can be directly
entered
Example:
Directly entering the call sign “JM1ZLK”
1 Hold down [DR] for 1 second to display the DR
screen
2
Push [RX→CS] to select “TO,” then push [ENT].
3 Select “Direct Input (UR)”
4 Enter a call sign of up to 8 characters, including
spaces
L
See page iii on how to enter characters
5 After entering, push [ENT]
•
Returns to the DR screen, and “JM1ZLK” is displayed
in “TO”
L
After entry, you can correct the call sign in the
DIRECT INPUT (UR) screen
L
The entered call sign remains on the DIRECT INPUT
(UR) screen, until you enter a new call sign
TIP:
If the entered call sign is duplicated in the
“Your Call Sign” memory, the name is displayed
(Only when the name has been entered)
“TO” (Destination) setting
[ENT]
[Down]
[Up]
[ENT]
[Down]
[Up]