![background image](http://html2.mh-extra.com/html/icom/id-31a-plus/id-31a-plus_advanced-manual_4733647221.webp)
Remote Control function
R-2
Remote control (CI-V) information
D
Command table
Command
Sub
Data
Description
00
See p. R-3 Send operating frequency for transceive
01
See p. R-3 Send operating mode for transceive
03
See p. R-3 Read operating frequency
04
See p. R-3 Read operating mode
05
See p. R-3 Send operating frequency
06
See p. R-3 Send operating mode
07
Select the VFO mode
0C
See p. R-3 Read frequency offset*
1
0D
See p. R-3 Send frequency offset
0F
Read duplex setting
(10= simplex, 11= DUP–, 12= DUP+)
10
Set simplex operation
11
Set DUP– operation
12
Set DUP+ operation
14
01 See p. R-3 Send/Read audio output level
03 See p. R-3 Send/Read squelch level
0A See p. R-3 Send/Read RF power setting
0B
See p. R-3 Send/Read external microphone gain
16 See p. R-3 Send/Read VOX gain
15
01
00
Read noise/S-meter squelch status
(squelch close)
01
Read noise/S-meter squelch status
(squelch open)
02 0000 ~ 0255 Read S-meter level (0000= S0, 0170= S9)
05
00
Read tone squelch and RF squelch status
(squelch close)
01
Read tone squelch and RF squelch status
(squelch open)
11 0000 ~ 0255 Read RF power meter
( 0005= S-LOW, 0026= LOW1, 0051=
LOW2, 0128= MID, 0255= HIGH)
16
42
00
Send/Read Repeater tone OFF
01
Send/Read Repeater tone ON
43
00
Send/Read Tone squelch OFF
01
Send/Read Tone squelch ON
02
Send/Read Reversed Tone squelch ON
46
00
Send/Read VOX function OFF
01
Send/Read VOX function ON
4B
00
Send/Read DTCS OFF
01
Send/Read DTCS ON
02
Send/Read Reversed DTCS ON
5B
00
Send/Read DSQL/CSQL OFF (DV mode
only)
01
Send/Read DSQL ON (DV mode only)
02
Send/Read CSQL ON (DV mode only)
5C
00 ~ 02
Send/Read GPS TX mode
(00= OFF, 01= D-PRS, 02= NMEA)
5D
00 ~ 09
Send Tone setting
( 00= OFF, 01= TONE, 02= TSQL,
03=DTCS, 04=TSQL-R, 05=DTCS-R,
06=DTCS (T), 07=TONE (T)/DTCS (R),
08=DTCS (T)/TSQL (R), 09=TONE (T)/
TSQL (R))
See ADVANCED MANUAL Section 12
about the Tone function.
18
00
Turn OFF the transceiver
01
Turn ON the transceiver*
2
19
00
Read transceiver ID.
1B
00
See p. R-4 Send/Read Repeater tone frequency
01 See p. R-4 Send/Read Tone squelch frequency
02 See p. R-4 Send/Read DTCS code and polarity
07 See p. R-4 Send/Read CSQL code (DV mode)
1C
00
00
Send/Read Transceiver’s status (RX)
01
Send/Read Transceiver’s status (TX)
Command
Sub
Data
Description
1F
00
See p. R-4 Send/Read DV MY call sign
01 See p. R-4 Send/Read DV TX call signs
02 See p. R-4 Send/Read DV TX message
20
00 00
00/01*
3
Send/Read Auto DV RX Call signs output
(00= OFF, 01= ON)
01 See p. R-5 Output DV RX Call signs for transceive
02 See p. R-5 Read DV RX Call signs
01
00
00/01*
3
Send/Read Auto DV RX message output
(00= OFF, 01= ON)
01 See p. R-5 Output DV RX message for transceive
02 See p. R-5 Read DV RX message
02
00
00/01*
3
Send/Read Auto DV RX status output
(00= OFF, 01= ON)
01 See p. R-5 Output DV RX status for transceive
02 See p. R-5 Read DV RX status
03
00
00/01
Send/Read Auto DV RX GPS/D-PRS data
output (00= OFF, 01= ON)
01 See p. R-6 Output DV RX GPS/D-PRS data for
transceive
02 See p. R-6 Read DV RX GPS/D-PRS data for
transceive
04 00
00/01
Send/Read Auto DV RX GPS/D-PRS
message output (00= OFF, 01= ON)
01 See p. R-8 Output DV RX GPS/D-PRS message for
transceive
02 See p. R-8 Read DV RX GPS/D-PRS message for
transceive
22
00
See p. R-8 Send/Read DV TX data (Up to 30 bytes)
01
00
00/01
Send/Read Auto DV RX data output
(00= OFF, 01= ON)
01 See p. R-8 Output DV RX data for transceive
(Up to 30 byte)
02
00/01
Send/Read DV data TX setting
(00= PTT, 01= Auto)
03
00/01
Send/Read DV fast data setting
(00=OFF, 01= ON)
04
00/01
Send/Read GPS Data Speed setting
(00= Slow, 01= Fast)
05
00 ~ 10
Send/Read TX Delay (PTT) setting
(00= OFF, 01= 1 sec. ~ 10= 10 sec.)
23
00
See p. R-8 Read the position
01
00
Send/Read the internal GPS OFF
01
Send/Read the internal GPS ON
02
Send/Read the external GPS ON
03
Send/Read the manual input
02
See p. R-8 Send/read manually input position
24
00 00
00/01
Send/read TX output power setting OFF
(00=OFF, 01= ON)
01
00/01
TX output power setting for transceive
(00=OFF, 01= ON)
*
1
Less than 100 Hz is omitted.
*
2
When sending the power ON command (18 01), the command
“FE” must be sent before the basic format.
• 19200bps: 48 • 9600bps: 24 • 4800bps: 12
• 1200bps: 4
• 300bps: 2
q
w
e
r
t
u
F
F E
×12
0
A
E
F
E
E
1
0
8
1
0
D
F
Example: When operating with 4800 bps
q
Preamble code (fixed)
w
Transceiver’s default address
e
Controller’s default address
r
Command number
t
Sub command number
y
End of message code (fixed)
*
3
Output setting is automatically turned OFF after turning the power
OFF, then ON.