![background image](http://html2.mh-extra.com/html/icom/id-31a-plus/id-31a-plus_advanced-manual_4733647115.webp)
7
MEMORY OPERATION
7-7
D
Directly writing into a Memory Bank
You can also write the Memory content directly into
a Memory Bank channel� This way is a short cut to
creating a Memory channel, and then assigning it to
a Bank� In that case, the transceiver automatically
selects the lowest blank Memory channel to write�
Example:
Writing 441�100 MHz into Bank “J-01�”
1� Push [V/MHz]to enter the VFO mode�
2� Rotate [DIAL] to select 441�100 MHz�
3� Hold down [S�MW] for 1 second�
•
Enters the Select Memory Write mode�
•
The Memory channel number blinks�
4� Push [QUICK]�
5� Select “Bank Select�”
6� Rotate [DIAL] to select a Bank�
▼
•
The Memory channel number blinks�
L
To select another Bank, push [QUICK] and select
“Bank Select�”
7� Rotate [DIAL] to select a Bank channel�
L
If you select an already assigned Bank channel, its
content is displayed�
TIP:
If you keep holding down [S� MW] after writing
to the Bank channel, the Bank channel number is
automatically incremented after returning to the VFO
mode�
Memory Bank setting
[ENT]
[Down]
[Up]
8� Hold down [S�MW] for 1 second�
▼
•
Writes the Memory content to the Bank channel�
•
Returns to the Memory mode�
L
If you select an already assigned Bank channel, the
previous content is overwritten�
Blinks
Blinks
Briefly displayed