![background image](http://html2.mh-extra.com/html/icom/id-31a-plus/id-31a-plus_advanced-manual_4733647059.webp)
4
D-STAR OPERATION
4-35
Entering new information into the repeater list
D
Entering new information into the repeater list
Step 15. Selecting the position data accuracy level
L
When the Near Repeater Search function is not
used, or the distance between your position and
a repeater is not needed, select “OFF,” and go to
Step 18. Setting the UTC offset
1 Select “POSITION”
2 Select the position data accuracy level
•
None:
Select when the repeater has no position
data
• Approximate: Select when the entered position data is
approximate.
• Exact:
Select when the entered position data is
exactly correct.
Step 16. Entering the latitude
L
This item is displayed only when
Step 15.
Selecting the position data accuracy level
is set
to “Approximate” or “Exact.”
1 Select “LATITUDE”
2 Rotate [DIAL] to enter the latitude
L
Push [CD] or [CS] to move the cursor
L
To enter a north latitude, select “N,” and to enter a
south latitude, select “S”
3 After entering, push [ENT]
Step 17. Entering the longitude
L
This item is displayed only when
Step 15.
Selecting the position data accuracy level
is set
to “Approximate” or “Exact.”
1 Select “LONGITUDE”
2 Rotate [DIAL] to enter the longitude
L
Push [CD] or [CS] to move the cursor
L
To enter an east latitude longitude, select “E,” and to
enter a west longitude, select “W”
3 After entering, push [ENT]
Step 12. Setting the FM mode
L
When
Step 2. Selecting the communication type
is set to “DV Repeater” or “DV Simplex,” this item is
not displayed
1 Select “MODE”
2 Select “FM” or “FM-N”
Step 13. Setting the tone
L
When
Step 2. Selecting the communication type
is set to “DV Repeater” or “DV Simplex,” this item is
not displayed
1 Select “TONE”
2 Select an option
•
OFF: Turn OFF the Tone function
•
TONE: Select when the repeater requires an access
tone
•
TSQL: Select when you want to use the tone squelch
operation in simplex.
Step 14. Selecting the repeater tone frequency
L
When
Step 2. Selecting the communication type
is set to “DV Repeater” or “DV Simplex,” this item is
not displayed
L
This setting is required when
Step 13. Setting the
tone
is set to “TONE” or “TSQL”
1 Select “REPEATER TONE”
2 Rotate [DIAL] to select the repeater tone
frequency, then push [ENT]
► Continued on the next page
[ENT]
[Down]
[Up]