background image

11

MENU SCREEN

11-37

Function items

• During RX/Standby: 

: Default setting 

Function

Description

Remote MIC Key

[A]

[B]

[

]

[

]

---

No function

UP

Push to increase the frequency, Memory channel, 

repeater, or station call sign�

DOWN

Push to decrease the frequency, Memory channel, 

repeater, or station call sign�

VOL UP

Push to increase the volume level�

VOL DOWN

Push to decrease the volume level�

Monitor 

(Push)

Hold down [SQL] to open the squelch� 

Release to close the squelch�

Monitor (Hold) Push to open or close the squelch�
CALL

Push to select a Call channel�

MR (000 CH) In the Memory mode, push to select Memory 

channel 000�

MR (001 CH) In the Memory mode, push to select Memory 

channel 001�

VFO/MR

Push to select the VFO mode and the Memory 

mode�

DR

Push to turn the DR function ON or OFF�

FROM (DR)

On the DR screen, push to select “FROM�”

TO (DR)

On the DR screen, push to select “TO�”

Home CH

Push to directly select the Home CH that is set to the 

selected mode (VFO/Memory) or DR screen�

While in the CALL CH mode, or when no Home CH 

is set, an error beep sounds�

SCAN

Push to start a scan�

While scanning, push to stop the scan�

Temporary 

Skip

Push to set the frequency to be skipped during 

scanning�

The selected frequencies are temporarily skipped for 

faster scanning�

RX>CS

Hold down for 1 second to set the last calling 

station’s call sign to “TO” (destination)�

SPEECH

Push to announce the frequency, operating mode or 

call sign�

 

L

 In the VFO, Memory or Call channel mode, the 

frequency and the operating mode are announced�

 

L

 In the DR screen, the call sign is announced� If Simplex 

is selected, the frequency is announced�

Voice TX

Push to transmit the voice audio recorded on the 

microSD�

Hold down for 1 second to repeatedly transmit the 

voice audio�

Summary of Contents for ID-31A PLUS




































































































































































































































Reviews: