11
MENU SCREEN
11-36
Function items
Monitor
(Default: Push)
MENU > Function >
Monitor
Select an option for the [SQL] Monitor function�
(BASIC MANUAL Section 3)
•
Push: Hold down [SQL] to monitor the frequency�
Release to stop monitoring�
•
Hold: Push [SQL] momentarily to monitor the
frequency and push momentarily again to
cancel it�
Dial Speed-UP
(Default: ON)
MENU > Function >
Dial Speed-UP
Turn the Dial Speed Acceleration ON or OFF�
The acceleration automatically speeds up the tuning
dial speed when you rapidly rotate [DIAL]�
•
OFF: Turns OFF the function�
•
ON: Turns ON the function�
Auto Repeater
(Default: ON (DUP))
MENU > Function >
Auto Repeater
The Auto Repeater function automatically turns the
Duplex operation and Tone Encoder* ON or OFF�
The offset and repeater tone are not changed by this
function� Reset these setting values, if necessary�
L
This item is displayed only in the USA version
transceiver�
•
OFF:
Turns OFF the function�
•
ON (DUP):
Turns ON the Duplex operation
only� (Default)
•
ON (DUP, TONE): Turns ON the Duplex operation
and Tone Encoder*�
* The Tone Encoder is not turned ON in the DV mode�
Remote MIC Key
MENU > Function >
Remote MIC Key
The function assignments for the [A], [B], [
], and
[
] keys on the optional HM-75LS
remote
control
speaker
microphone
can be changed�
See pages 11-36 and 11-37 for the assignable key
functions�
• During RX/Standby: The assigned key function is
enabled while receiving or in the
standby mode�
• During TX:
The assigned key function is
enabled while transmitting�
TIP: Volume level adjustment while monitoring
•
When [VOL UP]/[VOL DOWN] are assigned, push
these keys to adjust the volume level�
•
When [VOL UP]/[VOL DOWN] are not assigned,
but [UP]/[DOWN] are assigned, push these keys
to adjust the volume level�
•
When [VOL UP]/[VOL DOWN]/ [UP]/[DOWN] are
not assigned, push [
]/[
] to adjust the volume
level, if [Monitor (Push)] or [Monitor (Hold)] is not
assigned to [
]/[
]�