7
MEMORY OPERATION
7-11
You can clear the entered Memory channel content�
1� Push [M/CALL] to enter the Memory mode�
2� Hold down [S�MW] for 1 second�
•
Enters the Select Memory Write mode�
•
The Memory channel number blinks�
3� Rotate [DIAL] to select a Memory channel�
4� Push [QUICK]�
5� Select “Clear�”
• The confirmation dialog is displayed.
6� Select <YES>�
▼
•
The content is cleared�
Clearing a Memory channel content
NOTE:
•
A cleared content cannot be recovered�
•
If you clear all the Program Scan Edge channels
contents, you cannot use the Program scan�
TIP:
You can also clear the following contents
depending on the selected Memory channel:
•
000 ~ 499:
Memory channel content
•
C0, C1:
Call channel content
•
00A/00B ~ 24A/24B: Program Scan Edge channel
content
[ENT]
[Down]
[Up]
Blinks