Icom ID-31A PLUS Advanced Manual Download Page 73

Page: 73 / 227

GPS OPERATION

5-6

MY screen (Your position information)

When GPS Select is set to “Manual,” compass heading and course direction are not displayed. (p. 11-9)

RX screen (Callerʼs position information)

Depending on the callerʼs GPS TX Mode and TX format, displayed itemʼs meanings differ, and some data may not

be displayed. (p. 5-7)

Example:

The caller stationʼs GPS TX Mode is “D-PRS” and its TX format is “Position (Mobile).”

MEM screen (GPS Memory channel’s information)

ALM screen (GPS Alarm Memory channel’s information)

Checking your position

GPS POSITION screens and their

meanings

Information

• Pushing [QUICK] to change the compass direction.

(p. 5-9)

• About the Course (p. 5-8)

• About the Grid Locator (p. 5-8)

Example for the GPS POSITION screens:

GPS Alarm:

Tokyo Big Sight

GPS Memory:

Tokyo Skytree

251 ml

0.1 ml

Caller station

(D-PRS: mobile)

Course: 247 degrees

Speed: 2.3 mph

Your station

Course: 90 degrees

Speed: 1.4 mph

249 ml

←Course direction

←Speed

←Latitude

←Longitude

↑

Received time

Compass direction

top is North.

↓

Your course

heading is

East.

←Altitude

→

Direction from

your position

→

← Distance from

your position

↑

Direction from

your position

→

← Distance from

your position

↑

When a name is not entered in the GPS Memory

channel, date and time are displayed instead of the

name.

In the Quick Menu window, you can change the

GPS Memory or GPS Alarm in the GPS POSITION

screen.

(p. 5-8)

↑

Caller’s call sign with SSID

← Distance

from your

position

→

Direction

from your

position

D-PRS symbol

← Callerʼs

Course

direction

↑

Time the caller acquired

the position data

Summary of Contents for ID-31A PLUS




































































































































































































































Search results

Summary of Contents for ID-31A PLUS

Reviews:

Related manuals for ID-31A PLUS

Brands by name

Popular brands

Icom ID-31A PLUS, Advanced Manual

Search results

Summary of Contents for ID-31A PLUS

Reviews:

Related manuals for ID-31A PLUS

Brands by name

Popular brands