![background image](http://html2.mh-extra.com/html/icom/id-31a-plus/id-31a-plus_advanced-manual_4733647040.webp)
4
D-STAR OPERATION
4-16
Connecting to a reflector
D
Using a reflector
1
Push [RX→CS] to select “TO,” then push [ENT].
•
Displays the TO SELECT screen
2 Select “Reflector”
•
Displays the REFLECTOR screen
3 Select “
Use Reflector
”
• Returns to the DR screen, and “Use Reflector” and
“CQCQCQ” are displayed in “TO”
4 Hold down [PTT] to transmit
D
Reflector
Echo Testing
To confirm that your signal is correctly getting into the
repeater, you can transmit a short message as a trial
After releasing [PTT], your message will be played
back
1
Push [RX→CS] to select “TO,” then push [ENT].
•
Displays the TO SELECT screen
2 Select “Reflector”
•
Displays the REFLECTOR screen
3 Select “Echo Test”
•
Returns to the DR screen, and “Echo Test” and “E” are
displayed in “TO”
4 Hold down [PTT] and speak into the microphone
5 Release [PTT] to hear your message
D
Requesting repeater information
When you send the repeater information command, an ID
message is sent back
1
Push [RX→CS] to select “TO,” then push [ENT].
•
Displays the TO SELECT screen
2 Select “Reflector”
•
Displays the REFLECTOR screen
3 Select “Repeater Information”
•
Returns to the DR screen, and “Repeater Information”
and “I” are displayed in “TO”
4 Hold down [PTT] to transmit the repeater
Information command
5 Release [PTT] to hear the repeater ID message