![background image](http://html2.mh-extra.com/html/icom/id-31a-plus/id-31a-plus_advanced-manual_4733647157.webp)
11
MENU SCREEN
11-14
Alarm Area (RX/Memory)
(Default: Both)
MENU > GPS > GPS Alarm>
Alarm Area (RX/
Memory)
Select the GPS active alarm range�
When a target enters in the active alarm range, the
GPS Alarm sounds and the GPS alarm icon blinks�
L
When
Alarm Select
is set to “RX” or “Memory,” this
setting is enabled�
•
Limited: The transceiver sounds 3 beeps and the
GPS Alarm icon blinks when the target
enters the 500 meter range�
•
Extended: The transceiver sounds 3 beeps and the
GPS Alarm icon blinks when the target
enters the 1 kilometer range�
•
Both:
The transceiver sounds a beep and the
GPS Alarm icon blinks when the target
enters the 1 kilometer range, and sounds
3 beeps and the icon blinks when it enters
the 500 meter range�
When the target exits the 500 meter
range, but is still in the 1 kilometer range,
the icon continues to blink, but no beeps
sound�
Example:
When a target station enters in the active alarm range
(500 meter or 1 kilometer range, depending on the
setting), the GPS Alarm sounds and the GPS Alarm
icon blinks�
Target station
Sounds 3 beeps.
Sounds a beep.
Limited range
Approximately 500 m, 547 Y
Extended range
Approximately 1 km, 1094 Y
Your location
N
GPS Logger
(Default: ON)
MENU > GPS > GPS Logger >
GPS Logger
Turn the GPS Logger function ON or OFF�
This function logs the position, altitude, course, speed,
and number of satellites being used�
L
BE SURE to insert a microSD card�
L
When
GPS select
is set to “OFF” or “Manual,” this
function does not save the log�
•
OFF: Turns OFF the function�
•
ON: The transceiver automatically logs GPS data�
Once this function is turned ON, the GPS data
will be continuously logged until the function
is turned OFF, even if the transceiver is turned
OFF, then ON again�
TIP:
The log data is saved on the microSD card�
The file name is automatically created, as shown
below:
•
Log start date and time: 31st October 2017
15:30:00
•
File name:
20171031_153000�log
Record Interval
(Default: 5sec)
MENU > GPS > GPS Logger >
Record Interval
Set the GPS Logger function record interval to 1, 5,
10, 30, or 60 seconds�
Record Sentence
(Default:
✔
RMC/
✔
GGA/
✔
VTG/
✔
GSA)
MENU > GPS > GPS Logger >
Record Sentence
Set the GPS Logger function record sentence to
RMC, GGA, VTG, or GSA�
•
Displays “
✓
” when the sentence is set�
NOTE:
Select at least one sentence, otherwise an
error beep will sound�
<<GPS Logger Only>>
MENU > GPS > GPS Logger >
<<GPS Logger
Only>>
You can turn ON the GPS Logger Only mode ON�
In this mode, only the GPS Logger is functioning and
the transceiver does not transmit or receive� (p� 5-32)
Information
L
•
BE SURE to insert a microSD card�
•
Set
GPS Select
to “Internal GPS,” or “External GPS�”
(p� 11-9)
•
To cancel the mode, reboot the transceiver�
GPS items