![background image](http://html2.mh-extra.com/html/icom/id-31a-plus/id-31a-plus_advanced-manual_4733647072.webp)
5
GPS OPERATION
5-5
Checking your position
You can check your current position.
This section is described using received position data.
L
The screens are just examples.
D
Displaying Position Data
1�
Push [QUICK] in the standby mode.
2�
Select “GPS Position.”
3�
Rotate [DIAL].
• My screens (MY), received screens (RX), the GPS
Memory channel screen (MEM), and the GPS Alarm
channel screen (ALM) are displayed.
↑
The displayed icon depends on the type of
screen (MY, RX, MEM, or ALM).
L
To exit the MENU screen, push [MENU].
[ENT]
[Down]
[Up]
NOTE:
Latitude, longitude, and altitude data may
differ, depending on your received GPS signal.
TIP:
• If you transmit with the GPS POSITION screen
open, the screen is temporarily canceled. To
check the position, push [QUICK], then select
“GPS Position” while transmitting.
• On the MY screen or RX screen, you can enter
the displayed position information in a GPS
Memory by pushing [QUICK] and selecting “GPS
Memory.”
• See page 5-20 about the GPS Memory function
and see page 5-25 about the GPS Alarm function
to know more details.