![background image](http://html2.mh-extra.com/html/icom/id-31a-plus/id-31a-plus_advanced-manual_4733647187.webp)
11
MENU SCREEN
11-44
Sounds items
Beep Level
(Default: 3)
MENU > Sounds >
Beep Level
Set the beep audio output level to 0 (OFF) or 1
(minimum) ~ 9 (maximum)�
Beep/Vol Level Link
(Default: OFF)
MENU > Sounds >
Beep/Vol Level Link
Select whether or not the beep output level can be
adjusted by rotating [VOL]�
• OFF: The output level is fixed to the level set in
Beep Level
�
• ON: The output level can be adjusted by rotating
[VOL]�
Key-Touch Beep
(Default: ON)
MENU > Sounds >
Key-Touch Beep
Turn the confirmation beep tones ON or OFF.
• OFF: No beep sounds.
• ON: A beep sounds when you push a key.
Home CH Beep
(Default: ON)
MENU > Sounds >
Home CH Beep
Turn the Home CH Beep ON or OFF�
L
In the VFO or Memory mode, when the Home CH
frequency or Home CH Memory channel is selected, the
Home CH Beep sounds�
L
In the DR screen, when the Home CH Access repeater is
set to FROM, the Home CH Beep sounds�
• OFF: No beep sounds.
• ON: Sounds a beep when you select the Home CH
by rotating [DIAL]�
Scan Stop Beep
(Default: OFF)
MENU > Sounds >
Scan Stop Beep
Turn the scan stop beep ON or OFF�
• OFF: No beep sounds.
• ON: A beep sounds when a scan stops by receiving
a signal�
Standby Beep
(Default: ON (to me: Alarm/High Tone))
MENU > Sounds >
Standby Beep
Turn the Standby Beep function ON or OFF�
This function sounds a beep after a received signal
disappears, in the DV mode�
L
The Standby Beep sounds even when
Key-Touch Beep
is set to “OFF�”
L
The Standby Beep output level is depending on the
Beep
level
setting�
• OFF: Does not sound a beep after a received signal
disappears�
• ON: Sounds a beep after a received signal
disappears�
• ON (to me: High Tone):
Sounds a high pitched beep when a received
signal addressed to your call sign (MY)
disappears�
When any other received signal disappears, a
regular beep sounds�
• ON (to me: Alarm/High Tone):
Sounds an alarm (PiRoPiRoPiRo) when a
received signal addressed to your call sign
(MY) disappears�
When any other received signal disappears, a
regular beep sounds�
Scope AF Output
(Default: ON)
MENU > Sounds >
Scope AF Output
Select an audio output option during a sweep by the
Band Scope function�
• OFF: No audio is heard during the sweep.
• ON: Audio is heard during the sweep.
NOTE:
The default settings shown below are for the USA transceiver version� The default settings may differ,
depending on your transceiver version� To return to your transceiver version’s default settings, see page 11-3�